1. Treatment of Sleep Apnea:

• CPAP is primarily used to treat obstructive sleep apnea (OSA), a common sleep disorder where the airway collapses or becomes blocked during sleep.
• The continuous positive airway pressure generated by the CPAP machine helps keep the airway open, preventing pauses in breathing and improving oxygen levels.

2. Alleviation of Snoring:

• CPAP therapy is effective in reducing or eliminating snoring, a common symptom of sleep apnea.
• The pressurized air from the CPAP machine prevents the vibration of tissues in the throat, which is a leading cause of snoring.

3. Management of Respiratory Distress:

• CPAP is also used in medical settings to manage respiratory distress in conditions such as acute respiratory failure or pneumonia.
• The positive pressure delivered by the CPAP machine assists in keeping the air sacs in the lungs open, improving oxygen exchange and easing breathing difficulties.

FEATURES

• Therapy made easy. The AirStart 10 APAP therapy device is designed to be intuitive and easy-to-use. With no complicated menus or settings to navigate, patients can simply plug in the device and press Start.
• Excellent value. With out-of-the-box simplicity, AirStart 10 devices give you excellent value on the latest technology platform.
• Built-in humidification

PRODUCT SPECIFICATIONS

• Height –  116 mm
• Weight – 1106 gm
• Breadth -205 mm
• Length -150 mm
• Sound pressure level – 26.6 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2009 (CPAP mode)
• Modes – CPAP, APAP, Ramp
• Sound power level – 26.6 dBA with uncertainty of 2 dBA
• Peak power consumption -104W (108VA)
• Operating pressure range -4–20 cm H2O
• Supplemental oxygen Maximum flow -Recommended maximum flow: 4 L/min
• Power supply unit – 90W power supply unit
• Storage and transport humidity -5 to 95% relative humidity, non-condensing
• Storage and transport temperature –20°C to +60°C
• Operating humidity – 10 to 95% relative humidity, non-condensing
• Housing construction – Flame retardant engineering thermoplastic
• Air outlet – 22 mm air outlet complies with ISO 5356-1:2004
• Typical power consumption – 53W (57VA)
• Sensors – Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
• Operating altitude – Sea level to 2,591 m; air pressure range 1013 hPa to 738 hPa
• Operating temperature – +5°C to +35°C
• Maximum single fault steady-state pressure – The device will shut down in the presence of a single fault if the steady-state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec.

CONTENT OF BOX

• ResMed AirStart 10 Auto CPAP machine
• Built in HumidAir™ Standard Tub Heated Humidifier
• Standard Tubing of 22mm
• SD Card (Installed)
• 1 – Standard Filter (Installed)
• Power Supply and Cord
• Travel Bag
• User Guide
• Mask is not included in the box piece.

Warranty : 2 Year